Skip to content
Translate

Read this page in…

Español中文 (简体)中文 (繁體)Tiếng ViệtTagalogالعربيةFrançais日本語한국어РусскийPortuguêsहिन्दी

Opens Google Translate in a new tab. Machine translation can be imperfect — the English page is the original.

🔧 Everyday Fixes

Flat Tire on My Way to Class: How I Learned to Fix It in 20 Minutes

How to fix a flat bike tire, even if you've never done it: find the hole, patch or swap the tube, check the tire for glass, and pump to the right pressure.

“Almost cried fixing my own house. Learned to read every quote instead.”

Share
Flat Bike Tire? Fix It in 20 Minutes - title card with a screenshot of ifixit.com

Theology · Scripture Cards

Open a scripture card

Already read and shared by 315 people.

See all scripture cards

Key Takeaways

  • Find and remove what caused the flat before installing a new tube.
  • Match the tube size and valve type to your tire.
  • Keep tires at the sidewall pressure to prevent pinch flats.

Halfway across campus, my bike started feeling squishy. Then bumpy. Then I was pushing it next to me like a sad dog walk, already late for my 9 a.m. If you want to know how to fix a flat bike tire, good news: it's one of the most learnable repairs out there, and once you've done it, you'll never feel stuck again.

What you need

  • Two or three tire levers (plastic is fine and cheap)
  • A patch kit or a spare inner tube in your size
  • A pump that fits your valve type
  • Optional: a rag and a small bowl of water

Your tire size is printed on the sidewall of the tire, like 700x32c or 26x2.0. Your valve is usually either a Schrader (looks like a car valve) or a Presta (thin, with a small nut on top that you unscrew to let air in). Your pump needs to fit your valve type, and many pumps handle both.

Screenshot of ifixit.com with this passage outlined: Pump the bike tire up until it is roughly at 75 PSI or when the wheel feels solid when u squeeze it.
Source: ifixit.com. The orange outline marks the passage that says: “Pump the bike tire up until it is roughly at 75 PSI or when the wheel feels solid when u squeeze it.” The outline is ours; the rest is the live page.

iFixit's bicycle repair page has photo guides for things like replacing a tube and adjusting brakes. I followed one on my phone, propped against a bench, the first time I did this.

Step-by-step: the flat fix

  1. Take the wheel off* if needed. Open the brake if it's a rim brake, then open the quick-release lever or loosen the axle nuts. For a rear wheel, shift to the smallest gear first; it makes the chain easier to handle.
  2. Let out any remaining air.*
  3. Hook a tire lever* under the tire's edge, pry it over the rim, then hook the lever on a spoke. Use a second lever a few inches away and slide it around until one side of the tire is off.
  4. Pull out the tube.*
  5. Find the hole.* Pump a little air into the tube and listen or feel for air. You can also dunk sections in water and watch for bubbles.
  6. Find what caused it.* This is the step most people skip. Carefully run your fingers inside the tire (slowly, there might be glass) and check the outside for a thorn or wire.
  7. Patch or replace.* Follow the patch kit directions, or use a new tube.
  8. Reinstall.* Put a little air in the tube to give it shape, tuck it in, and push the tire back onto the rim with your thumbs. Avoid using levers to put the tire back on if you can, since they can pinch the tube.
  9. Pump it up* to the pressure range printed on the tire's sidewall.

Why flats keep happening

Low pressure is a big one. An under-inflated tire can pinch the tube against the rim when you hit a curb, which leaves two little slits that look like snake bites. Check your pressure weekly. Like a lot of maintenance, the planning fallacy makes us think it'll be quick and painless forever, until it isn't.

There's also some physics here: air pressure inside the tube pushes the tire out and holds its shape, so a little leak changes a lot. Boyle's law explains why tires also feel softer in the cold.

When to get help

If the rim is bent, spokes are loose or broken, or the tire itself has a cut you can see through, take it to a shop or the campus bike co-op. Learning the fix yourself builds that IKEA effect pride, but some repairs need the right tools.

Know someone staring at a repair right now? Send this their way.

Pick an app — it just sends the link, nothing else.

X WhatsApp Telegram

Frequently Asked Questions

How do I fix a flat bike tire without a patch kit?

Replace the inner tube with a spare in your size. Find and remove whatever caused the flat first so the new tube doesn't puncture.

How do I know what size bike tube to buy?

Check the size printed on the tire sidewall, and match your valve type (Presta or Schrader).

Why does my bike tire keep going flat?

Common reasons are a sharp object still stuck in the tire, low pressure causing pinch flats, or a damaged rim strip.

How much air should I put in my bike tire?

Use the pressure range printed on the tire's sidewall and check it weekly.

Keep reading

Was this page helpful?