Skip to content
Translate

Read this page in…

Español中文 (简体)中文 (繁體)Tiếng ViệtTagalogالعربيةFrançais日本語한국어РусскийPortuguêsहिन्दी

Opens Google Translate in a new tab. Machine translation can be imperfect — the English page is the original.

🔌 Appliances

My Garbage Disposal Just Hums at Me. Here's the Safe Fix

Garbage disposal humming but not spinning? Learn the safe reset button and hex key trick, what never to put in it, and when to call apartment maintenance.

“Almost cried fixing my own house. Learned to read every quote instead.”

Share
Disposal Just Hums? Try This Safe Fix - title card with a screenshot of ifixit.com

Theology · Scripture Cards

Open a scripture card

Already read and shared by 315 people.

See all scripture cards

Key Takeaways

  • Hum means jam. Turn it off right away.
  • Free it with the hex key, then press reset.
  • Leaks or repeat trips go to maintenance.

You flip the switch and instead of the usual grind, you get a low, sad hum. If your garbage disposal is humming but not spinning in your apartment, it's usually jammed, and the fix is often way easier than it sounds.

Why it hums

The hum means the motor is getting power but the spinning part inside is stuck. Something hard or stringy is wedged between the turning plate and the grinding ring. Leaving it humming can overheat the motor, so turn the switch off right away. Flipping it on again and again hoping for a different result is the gambler's fallacy in kitchen form.

Step 1: Power off for real

Turn off the wall switch. Many units also plug into an outlet under the sink, so unplug it if you can. Never put your hand down the drain. Ever. Not even if you're sure it's off.

Step 2: The hex key trick

Lots of disposals have a small hex-shaped hole in the very center of the bottom of the unit, under the sink. Many come with a little hex wrench (sometimes stuck to the side or under the sink).

  1. With power off, put the hex key in that bottom hole.
  2. Work it back and forth until it turns freely. That frees the jam.
  3. Use tongs to pull out anything loose from the drain.

The iFixit garbage disposal hub has repair guides and photos showing where these parts are. Check your brand's manual too, since layouts vary.

Step 3: Press reset

There's usually a small red or black reset button on the bottom of the unit. If the motor overheated, it may have tripped. Press it once. Then restore power, run cold water, and switch it on.

What not to feed it

Things that commonly cause trouble: grease, fibrous peels, coffee grounds in big amounts, bones, and pasta or rice that swell. Run cold water while it's on and for a bit after. If you've got roommates, one quick group chat message saves a lot of drama. Shared sinks are a classic case of social loafing, where everyone assumes someone else will be careful.

When to call maintenance

If the hex key won't turn, the reset keeps tripping, it leaks under the sink, or you hear grinding metal, stop and put in a maintenance request. In a rental the disposal is usually the landlord's to fix. Writing it down is better than hoping it fixes itself, which is just optimism bias wearing a hoodie.

Know someone staring at a repair right now? Send this their way.

Pick an app — it just sends the link, nothing else.

X WhatsApp Telegram

Frequently Asked Questions

Why does my garbage disposal hum but not spin?

It's usually jammed. Turn it off, free it with the hex key at the bottom, and press reset.

Where is the reset button on a garbage disposal?

Usually on the bottom of the unit under the sink. It's often red.

Is it safe to reach into a garbage disposal?

No. Use tongs or pliers with the power off.

When should I call maintenance for a disposal?

If it leaks, keeps tripping, or the hex key won't turn.

Keep reading

Was this page helpful?