Skip to content
Translate

Read this page in…

Español中文 (简体)中文 (繁體)Tiếng ViệtTagalogالعربيةFrançais日本語한국어РусскийPortuguêsहिन्दी

Opens Google Translate in a new tab. Machine translation can be imperfect — the English page is the original.

🔧 Everyday Fixes

My Skateboard Rolls Like It's Dragging a Backpack Full of Textbooks

Skateboard wheels not spinning freely? Check axle nut tightness, clean or replace the bearings, inspect spacers, and keep your campus commute smooth.

“Almost cried fixing my own house. Learned to read every quote instead.”

Share
Slow Skate Wheels? Check Bearings - title card with a screenshot of ifixit.com

Theology · Scripture Cards

Open a scripture card

Already read and shared by 315 people.

See all scripture cards

Key Takeaways

  • Spin-test each wheel to find the problem.
  • Loosen overtight axle nuts first.
  • Clean or replace dirty or rusty bearings.

Your board used to glide across campus. Now you push and it stops like it hit invisible sand. If your skateboard wheels are not spinning freely and you suspect the bearings, you're probably right. The good news: this is one of the cheapest, most satisfying fixes for a broke commuter.

Quick test: spin each wheel

Flip the board over and spin each wheel by hand.

  • A healthy wheel spins for a while and slows smoothly.
  • A wheel that stops fast, grinds, or wobbles has a problem.
  • If one wheel is fine and another isn't, you found your troublemaker.
Screenshot of ifixit.com with this passage outlined: One way to get faster skateboard bearings includes replacing the bearings with a ratchet tool. Bearings are rated with an ABEC (Annular Bearing Engineering…
Source: ifixit.com. The orange outline marks the passage that says: “One way to get faster skateboard bearings includes replacing the bearings with a ratchet tool. Bearings are rated with an ABEC (Annular Bearing Engineering…” The outline is ours; the rest is the live page.

Check the easy causes first

  1. Axle nut too tight.* If the nut is cranked down, it squeezes the bearings. Loosen it a tiny bit so the wheel has a sliver of side-to-side play.
  2. Gunk and hair.* Pull hair or string out from around the axle.
  3. Missing or wrong spacers.* Some setups use spacers between bearings. Check that they're there if your board came with them.
  4. Flat spots or chunked wheels.* Damaged wheels can feel slow too.

Cleaning the bearings

You'll usually need a skate tool or wrench for the axle nuts.

  1. Take off the axle nut and washer, and slide the wheel off.
  2. Pop the bearings out of the wheel. Many people use the axle itself as a lever.
  3. Remove the shields if your bearings have removable ones.
  4. Clean them with a bearing cleaner or a solvent suggested by the bearing maker, then let them dry completely.
  5. Add a little skate lubricant, as the bearing maker suggests.
  6. Reassemble and spin-test.

iFixit's skateboard page has guides for bearings, wheels, and trucks with photos if you've never taken a board apart.

Why we keep riding slow

Getting used to a slow board is hedonic adaptation: it got worse so gradually you stopped noticing. Thinking you can skip maintenance forever is optimism bias. And loving a board you tuned yourself? That's the IKEA effect. Fair, honestly.

Budget breakdown

  • Free:* loosen axle nuts, pull out hair, spin test.
  • Cheap:* bearing cleaner and lube, or a basic skate tool.
  • Moderate:* a new set of bearings.
  • More:* new wheels if yours have flat spots or chunks.

Compare before you buy. Basic bearings are fine for commuting. You don't need pro-level gear to get to class.

Commuter safety basics

  • Wear a helmet. Campus pavement is undefeated.
  • Check your campus rules, some places limit skating in certain areas.
  • Avoid riding in the rain if you want your bearings to last.
  • Inspect trucks and bolts every so often so nothing loosens mid-ride.
  • Use lights or reflective gear if you ride at night.

When to call it

If the deck is cracked, a truck is bent, or bearings won't stop grinding after cleaning, it's time to replace parts. A local skate shop can help you pick what fits.

If this saved you a headache, it might save a friend one too.

Pick an app — it just sends the link, nothing else.

X WhatsApp Telegram

Frequently Asked Questions

Why don't my skateboard wheels spin freely?

The axle nut may be too tight, the bearings may be dirty or rusty, or spacers may be missing.

How do I clean skateboard bearings?

Remove the wheels and bearings, clean them with a bearing cleaner, dry fully, and lube lightly.

How tight should skateboard axle nuts be?

Snug with a slight bit of side-to-side play so the bearings aren't squeezed.

When should I replace skateboard bearings?

If they're rusty, grinding, or broken after cleaning, replace them.

Keep reading

Was this page helpful?